TABLE OF CONTENTS


In this article you will learn:

How to access the admin menu and update your sound Ingenico Lane 3000



Step 1: Access Admin Menu

  1. On the keypad press the F button to pull up password entry
  2. Enter the following password (this is case sensitive): CCMerchant
    • To enter letters, you will use the number and press it over and over to change it to a letter until you get the capital or lower case.
      • Example: pressing the number 1 multiple times will go through 1, a, b, c, A, B, C.
    • Once you get the character you want, wait 1 second for it to lock in and show now as *
    • Enter the next letter
  3. Press the Green O Button to log into the menu
  4. Navigating the menu
    1. Navigate with the UP and DOWN arrows
    2. Access a menu with the Green O Button
    3. Return back with the Yellow Arrow button.
-Password Menu


Back to top


Step 2: Update Beep Settings

  1. Navigate to and choose the Settings Option
  2. Navigate to and choose the Beep Option
  3. Here you can press the Green O Button on the option you wish to edit, type in the number, and press the Green O Button again to lock in the change
  4. When completed, you can press the Red X Button multiple times to return to the normal screen.


Parameter NameDefault ValueRangeDescription
Frequency (Hz)10020 - 20,000Controls the pitch of the beep.
Volume1001 - 100Controls the volume of the beep, as a percentage.
Time On (ms)25010 - 5.000Controls the length of each single beep.
Time Off (ms)25010 - 5,000Controls the length of time between each beep.


-Admin Menu

-Settings Menu

- Beep Settings


Back to top


Additional Resources and Help!

Still have questions? Please contact us any time at support@ezsoftpos.com.


NOTE: If emailing, please include your business name in the subject line of the email

and provide your preferred contact information for the best response time.


Visit our help center Help Center for more guides and tutorials